EcoStruxure Motor Control Configurator - LC3D180AF7
Products for Motor protection and control
TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 110 V AC coilShow more characteristics >
Main rangeTeSys product nameTeSys D product or component typeStar delta starter device short nameLC3D contactor applicationMotor control utilisation categoryAC-3 device presentationPre-wired poles description3 x 3P power pole contact composition3 x 3 NO [Ue] rated operational voltage<= 690 V AC 25...400 Hz for power circuit [Ie] rated operational current18 A (<= 60 °C) AC AC-3 for power circuit at <= 440 V motor power kW11 kW at 220/230 V AC 50/60 Hz22 kW at 415 V AC 50/60 Hz22 kW at 440 V AC 50/60 Hz18.5 kW at 380/400 V AC 50/60 Hz control circuit typeAC 50/60 Hz [Uc] control circuit voltage110 V AC 50/60 Hz auxiliary contact composition1 NC for KM1 star contactor [Uimp] rated impulse withstand voltage8 kV conforming to IEC 60947 overvoltage categoryIII [Ui] rated insulation voltage600 V certifications CSA power circuit600 V certifications UL power circuit600 V certifications CSA signalling circuit600 V certifications UL signalling circuit1000 V conforming to IEC 60947-4-1 power circuit1000 V conforming to IEC 60947-1 signalling circuit electrical durability1.65 Mcycles 18 A AC-3 <= 440 V safety coverProtective cover interlocking typeMechanical mounting supportRail standardsEN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508CSA C22.2 No 14 product certificationsBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)RINAUL Complementary connections - terminalsScrew clamp terminals for control circuit 1 1...4 mm² flexible without cable endScrew clamp terminals for control circuit 2 1...4 mm² flexible without cable endScrew clamp terminals for control circuit 1 1...4 mm² flexible with cable endScrew clamp terminals for control circuit 2 1...2.5 mm² flexible with cable endScrew clamp terminals for control circuit 1 1...4 mm² solid without cable endScrew clamp terminals for control circuit 2 1...4 mm² solid without cable endScrew clamp terminals for power circuit 1 1.5...6 mm² flexible without cable endScrew clamp terminals for power circuit 2 1.5...6 mm² flexible without cable endScrew clamp terminals for power circuit 1 1...6 mm² flexible with cable endScrew clamp terminals for power circuit 2 1...4 mm² flexible with cable endScrew clamp terminals for power circuit 1 1.5...6 mm² solid without cable endScrew clamp terminals for power circuit 2 1.5...6 mm² solid without cable end tightening torque1.7 N.m for power circuit screw clamp terminals flat Ø 6 mm1.7 N.m for power circuit screw clamp terminals Philips No 21.7 N.m for control circuit screw clamp terminals flat Ø 6 mm1.7 N.m for control circuit screw clamp terminals Philips No 2 operating rate30 cyc/h at <= 60 °C starting time30 s coil technologyWithout built-in suppressor module control circuit voltage limits0.3...0.6 Uc at 60 °C drop-out 50/60 Hz0.8...1.1 Uc at 60 °C operational 50 Hz0.85...1.1 Uc at 60 °C operational 60 Hz inrush power in VA70 VA at 20 °C 0.75 60 Hz70 VA at 20 °C 0.75 50 Hz hold-in power consumption in VA7.5 VA at 20 °C 0.3 60 Hz7 VA at 20 °C 0.3 50 Hz heat dissipation2...3 W at 50/60 Hz auxiliary contacts typeMechanically linked conforming to IEC 60947-5-1 3 x 1 NO + 1 NCMirror contact conforming to IEC 60947-4-1 3 x 1 NC signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on energisation between NC and NO contact1.5 ms on de-energisation between NC and NO contact width144 mm height124 mm depth143 mm product weight1.73 kg Environment insulation resistance> 10 MOhm for signalling circuit IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for storage-60...80 °C ambient air temperature for operation-40...70 °C at Uc operating altitude3000 m without derating in temperature fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor open 10 Gn for 11 msShocks contactor closed 15 Gn for 11 ms Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
D09A to D180A
with LAD S
with LAD S and sealing cover
Connections and SchemaWiring(1)Recommended cabling for reversal of motor rotation (standard motor, viewed from shaft end).(2)Remote control.
NOTE: LC3 D09A to D18A: Mechanical interlock between KM3 and KM1.