
soft starter for asynchronous motor - ATS48 - 100 A - 230..415 V - 22..90 KW
Show more characteristics >-
CharacteristicsÂ
Main range of product Altistart 48product or component type Soft starterproduct destination Asynchronous motorsproduct specific application Heavy duty industry and pumpsdevice short name ATS48power supply voltage 230...415 V (- 15...10 %)motor power kW 55 kW at 230 V (connection to the motor delta terminals) for standard applications55 kW at 400 V (connection in the motor supply line) for standard applications75 kW at 400 V (connection to the motor delta terminals) for severe applications90 kW at 400 V (connection to the motor delta terminals) for standard applications22 kW at 230 V (connection in the motor supply line) for severe applications30 kW at 230 V (connection in the motor supply line) for standard applications45 kW at 230 V (connection to the motor delta terminals) for severe applications45 kW at 400 V (connection in the motor supply line) for severe applicationspower dissipation in W For severe applications 252 WFor standard applications 322 Wutilisation category AC-53Atype of start Start with torque control (current limited to 5 In)Icl nominal current 110 A (connection in the motor supply line) for severe applications191 A (connection to the motor delta terminals) for severe applications191 A (connection to the motor delta terminals) for standard applications110 A (connection in the motor supply line) for standard applicationsIP degree of protection IP20Complementary assembly style With heat sinkfunction available External bypass (optional)power supply voltage limits 195...456 Vpower supply frequency 50...60 Hz (- 5...5 %)power supply frequency limits 47.5...63 Hzdevice connection To the motor delta terminalsIn the motor supply linefactory setting current 100 A[Uc] control circuit voltage 220 - 15 % to 415 + 10 %, 50/60 Hzcontrol circuit consumption 30 Wdiscrete output number 2discrete output type (LO1) logic output 0 V common configurable(LO2) logic output 0 V common configurable(R1) relay outputs fault relay NO(R2) relay outputs end of starting relay NO(R3) relay outputs motor powered NOoutput absolute accuracy precision +/- 5 %minimum switching current Relay outputs 10 mA at 6 V DCmaximum switching current Logic output 0.2 A at 30 V DCRelay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 msRelay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 msdiscrete input number 5discrete input type PTC, 750 Ohm at 25 °C(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohmdiscrete input voltage 24 V (<= 30 V)discrete input logic Positive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mAstarting current Adjustable 0.4...1.3 Iclanalogue output type (AO) current output 0-20 mA or 4-20 mA <= 500 Ohmcommunication port protocol Modbusconnector type 1 RJ45communication data link Serialphysical interface RS485 multidroptransmission rate 4800, 9600 or 19200 bpsmax nodes number 31protection type Phase failure (line)Thermal protection (motor)Thermal protection (starter)marking CEtype of cooling Forced convectionoperating position Vertical +/- 10 degreeheight 290 mmwidth 190 mmdepth 235 mmproduct weight 8.3 kgMotor power range AC-3 15...25 kW at 200...240 V 3 phases30...50 kW at 200...240 V 3 phases30...50 kW at 380...440 V 3 phases55...100 kW at 380...440 V 3 phasesmotor starter type Soft starterEnvironment electromagnetic compatibility Conducted and radiated emissions conforming to IEC 60947-4-2 level AConducted and radiated emissions conforming to IEC 60947-4-2 level BDamped oscillating waves conforming to IEC 61000-4-12 level 3Electrostatic discharge conforming to IEC 61000-4-2 level 3Immunity to electrical transients conforming to IEC 61000-4-4 level 4Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3Voltage/current impulse conforming to IEC 61000-4-5 level 3standards EN/IEC 60947-4-2product certifications CCCC-TickTCFDNVSEPROGOSTCSAULNOM 117vibration resistance 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27noise level 58 dBpollution degree Level 3 conforming to IEC 60664-1relative humidity 0...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3ambient air temperature for operation 40...60 °C with current derating of 2 % per °C-10...40 °C without deratingambient air temperature for storage -25...70 °Coperating altitude <= 1000 m without derating> 1000...2000 m with current derating of 2.2 % per additional 100 mContractual warranty Warranty period 18 months -
Documents and Downloads
Language- English
Software - ReleasedSizeAdd to My DocumentsSoMove V2.6.5 (FDT Standalone) (Version 2.6.5)DTM filesSizeAdd to My DocumentsAltistart DTM Library V12.0.0 (ATS22, ATS48) (Version 12.0.0)CatalogueSizeAdd to My DocumentsCatalog: Soft start/soft stop units Altistart 48 (Version 1.0)User guideSizeAdd to My DocumentsATS48 Getting Started Annex for UL508 (SCCR) (Version 00)CADSizeAdd to My Documentsreferences ATS48D62Q, ATS48D75Q, ATS48D88Q, ATS48C11Q, ATS48D62Y, ATS48D75Y, ATS48D88Y, ATS48C11Y (Version 1.0)Date 12/13/17Size 23.7 KBDate 12/13/17Size 191.4 KBDate 12/13/17Size 521.4 KBDate 12/13/17Size 61.8 KBreferences ATS48D62Q, ATS48D75Q, ATS48D88Q, ATS48C11Q, ATS48D62Y, ATS48D75Y, ATS48D88Y, ATS48C11Y (Version 1.0)Date 12/13/17Size 12.5 KBDate 12/13/17Size 109.7 KBDate 12/13/17Size 297.5 KBDate 12/13/17Size 30.4 KBCAD files for ATS48C11Q: Soft starter for asynchronous motor - ATS48 - 100 A - 230..415 V - 22..90 KW (Version 1.0)Date 2/4/19Size 109.4 KBCertificateSizeAdd to My DocumentsE184727 UL GENERIC CERTIFICATES (Version 1.0)End of Life InformationSizeAdd to My DocumentsAltistart 48 17 to 110 Amps - Standard applications, Product End-of-Life Instructions (Version 1.0)Date 12/14/17Size 196 KBMarine certificateSizeAdd to My DocumentsLR Marine Certificate ATS48 electronic soft starters (Version 1.0)DNV-GL Marine Certificate Altistart ATS48 motor starters (Version 1.0)Product Environmental ProfileSizeAdd to My DocumentsAltistart 48 17 to 110 Amps - Standard applications, Product Environmental Profile (Version 1.0)Date 12/14/17Size 278.1 KB -
Technical FAQs
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later. -
Dimensions Drawings
Dimensions(1) Right View
(2) Front View
-
Mounting and Clearance
Clearance