Technical FAQs

Ask a Question

What are the different Communication Networks on which the Altivar 61 Drive can be communicated?
The different Communication Networks on which the Altivar 61 Drive be communicated are as follows: 1. Ethernet TCP/IP 2. Modbus/Unitelway 3. Fipio...
Is M340 and M580 or Quantum can be install in SIL1 application?
M340 is not and will be not certified SIL1. The only range with SIL certification is Quantum. It is certified upto SIL3. So the Quantum family (140cpu67160s,...
We have forgotten the password for embedded webserver in ATV 6XX. Is there
Concerning Webserver, we don't have master password to reset password if lost. If administrator session password is locked, you can use the RWPE (Reset...
What are the minimum and maximum cable sizes recommended for use with TeSys D Star-Delta connection kits?
The minimum and maximum cable sizes recommended to be used with TeSys D Star-Delta kits are:   Kit Minimum (Sq. mm) Maximum (Sq. mm) LAD91217 1 4...
How to change page resolution in configured project of Vijeo Citect?
In order to change the resolution of the pages in Vijeo Citect project do following things:          1. Add the following INI parameter through Computer...
How to create a drop down menu in Vijeo Citect application for selecting items.
Sample Cicode script to get drop down menu feature for selection purpose in Vijeo Citect project is given below. ! Create a form, add combo box and...
Is DM6200 got any marine certification?
DM6200 meter is not marine certified.
PM8000 IRIG-B feature
1. Which digital input accepts the IRIG-B Signal? Can I set any of the DI to accept IRIG-B? For IRIG-B, one of your meter s digital inputs must be...
Can I get Test and Calibration Certicates for Schneider Electric Power Meters online?
As a first step in making you efforts minimal in getting these T & C Certificates..... The team in the SE, PM Bangalore factory, has now developed...
How do you set the M221 to start in RUN in SoMachine Basic?
Open your SoMachine Basic program and do the following; First go to the Programming tab Task Behavior At the bottom of page under Start Up go to the...
Results 1 - 10 of 100