Narrow By
  1. Your SelectionAll

Operating System - FAQs

FAQ Search
Most Recently Published FAQs

Results 11 - 20 of 54

FAQ ID Description
FA22674How to disable Windows Task Manager and Ctrl+Alt+Del control from Windows registry.
To disable Windows Task Manager and Ctrl+Alt+Del control from Windows registry follow the below steps :   Click Start Click Run Enter...
FA22670What is the meaning of error codes received during USB key authorization/upgrade in Vijeo Citect
Find following a complete list of known key return codes in Vijeo Citect that may be encountered after updating the key :     ...
FA22673What is the configuration setting for IO Server redundancy in Vijeo Citect 7.0 or later versions?
The configuration setting for IO Server redundancy in Vijeo Citect 7.0 or later versions is as tabulated below : Define Cluster - Cluster1 ...
FA22672Why does 'address out of range' error come in Vijeo Citect.
Actually Vijeo Citect reads digital addresses in blocks of 16 bits. So if there is a digital tag at C1000, Citect will read from C993 to C1008 in...
FA22668What is the new tag point count licensing in Citect SCADA V7.0
In CitectSCADA 6.10 or earlier, multiple tags that share the same I/O device address will be counted as a single I/O point. This is calculated at...
FA22675What is the compatibility between Switch2Vijeo tool version and Vijeo Designer versions
The compatibility between Switch2Vijeo tool version and Vijeo Designer versions for application program conversion is as tabulated below :   ...
FA12154When does the cooling fan of Altivar 71 Drive start.
In Altivar 71 drive from frame Size 2 to 5b the fan starts on a temperature Threshold (THD) = 70%.And from frame Size 6 to 15 the drive cooling fan...
FA12145Is the remote keypad option available for Altivar 21 Drive.
Yes, the remote keypad option is available for the Altivar 21 Drive. The reference for the same is VW3A21101. It can be installed remotely up to a...
FA12217Can TeSys range overload relays be used in DC application.
The overload relay with the bimetal technology (Thermal Overload) only can be used in DC application. Tesys LRD RangeTesys LRD thermal overload relays...
FA12208What is the maximum DC voltage per pole for TeSys F Range contactors.
The maximum DC voltage for TeSys F range contactors is 125 Volt per pole. This voltage is applicable for the specification of L/R

Results 11 - 20 of 54